We’ve upgraded Alisouq for a faster, smoother experience
Top Categories
Top Sellers
Customer Service
117.14
(incl. VAT)
Colors:
loading...
Product Overview
High-strength bonding Can only be removed once heated up to > 250C Suitable for screw connections exposed to high stresses A 100% seal is achieved- no additional securing parts are necessary Protects against corrosion due to friction and against rust Excellent media and thermal stability Universal products with wide range of applications Prevents detachment, e.g. through vibration and shock loads No unwanted locking problems such as with mechanical screw retainers, for example High resistance Resistant to a large number of bases, gases, solvents, oils and fuels (see resistance list) Silicone-free, solvent-free and oil-free DOS system: Practical one-handed operation thanks to the clever turn lock One hand always remains free. Continuously adjustable dispensing system Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum. No residue material in dispensing neck Costs optimised thanks to emptying with virtually no remaining product Notice The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre and painted surfaces. NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water The usage instructions are recommendations based on the tests we have conducted and on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Features
High-strength screw retainer Tough removable screw retainer and sealing compound single-handed dispensing system Chemical basis: Dimethacrylic acid ester Colour: Green fluorescent Density/conditions: 1.11 g/cm / in accordance with DIN EN ISO 2811-1 Min./max. viscosity /conditions: 500-900 mPas / at 25C, Brookfield RVT, spindle 2/20 rpm Suitable for max. thread: M25 Max. gap-filling ability: 0.15 mm Min./max. initial strength: 5-15 min Min./max. functional strength: 1-3 h Min./max. final strength: 3 h-6 h Min./max. compressive shearing strength /conditions: 15-30 N/mm / in accordance with ISO 10123 Min./max. breakaway torque: 30-60 Nm Breakaway torque conditions: DIN EN 15865 Min./max prevail torque: 10-30 Nm Conditions for prevail torque: DIN EN 15865 Min./max. processing temperature: 5 to 35 C Min./max. temperature resistance: -55 to 150 C Min. flashing point: 100 C Shelf life from production/conditions: 18 Month / at room temperature Silicone-free: Yes Solvent-free: Yes Fully hardening/curing conditions: Exclusion of oxygen and contact with metal (copper or iron ions) show more ... show less ...
Technical Specifications
High-strength bonding Can only be removed once heated up to > 250C Suitable for screw connections exposed to high stresses A 100% seal is achieved- no additional securing parts are necessary Protects against corrosion due to friction and against rust Excellent media and thermal stability Universal products with wide range of applications Prevents detachment, e.g. through vibration and shock loads No unwanted locking problems such as with mechanical screw retainers, for example High resistance Resistant to a large number of bases, gases, solvents, oils and fuels (see resistance list) Silicone-free, solvent-free and oil-free DOS system: Practical one-handed operation thanks to the clever turn lock One hand always remains free. Continuously adjustable dispensing system Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum. No residue material in dispensing neck Costs optimised thanks to emptying with virtually no remaining product Notice The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre and painted surfaces. NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water The usage instructions are recommendations based on the tests we have conducted and on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!