We’ve upgraded Alisouq for a faster, smoother experience
Top Categories
Top Sellers
Customer Service
loading...
Product Overview
High temperature resistance up to +250C, short term (max. 1.5 h) up to +300C High resistance to numerous chemicals, suitable for joints with chemical exposure (see resistance list) Resistant to ageing and UV Notice Please observe the "General Notes on Application for Sealants" overview sheet Sufficient air exchange should be ensured during the curing phase A higher coating thickness extends the curing time Classified in accordance with DIN 4102 B2 normal flammability (in cured state). The usage instructions are recommendations based on the tests we have conducted and our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Features
High-temperature silicone Special sealant for joints subject to high temperatures Contents: 310 ml Container: Cartridge Chemical basis: Sauer silicones (acetate systems) Smell/fragrance: Vinegar Colour: Red brown Continuous motion absorption: 20 % Min. skin-formation time: 8 min Min. breaking elongation: 350 % Shore A hardness: 30 Min./max. temperature resistance: -50 to 250 C Min./max. skin-formation time: 8-12 min Conditions for skin-formation time: at 23C and 50% relative humidity Full curing speed/conditions: 2 mm/d / 23C and 50% relative humidity Fungicidal properties: No Density: 1.05 g/cm Max. short-term temperature resistance: 300 C Min./max. processing temperature: 5 to 40 C Surface pre-treatment required: On porous surfaces Ultraviolet resistance: Yes Min. flashing point: 250 C Coating compatibility: Yes Resistance against: Aging Recoatable/Can be painted over: No Building material class: B2 - Normally inflammable Shelf life from production: 24 Month Conditions to maintain shelf life from production: at max. 25C show more ... show less ...
Technical Specifications
High temperature resistance up to +250C, short term (max. 1.5 h) up to +300C High resistance to numerous chemicals, suitable for joints with chemical exposure (see resistance list) Resistant to ageing and UV Notice Please observe the "General Notes on Application for Sealants" overview sheet Sufficient air exchange should be ensured during the curing phase A higher coating thickness extends the curing time Classified in accordance with DIN 4102 B2 normal flammability (in cured state). The usage instructions are recommendations based on the tests we have conducted and our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.