We’ve upgraded Alisouq for a faster, smoother experience
Top Categories
Top Sellers
Customer Service
loading...
Product Overview
No formation of sediment The individual constituents do NOT separate during storage Ready for use No prior stirring is necessary as with products in tubs, for example Easy to apply with a cartridge gun Frost-resistant Storage temperatures below 0 C (approx. -5 C) possible Silicone-free Notice When dry after curing, the putty is not elastic. The usage instructions are recommendations based on the tests we have conducted and our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Features
Furnace putty 1000 Solvent-free 1-component sealing compound with optimum heat resistance, high degree of strength and excellent adhesion to metal surfaces Chemical basis: Water glass luting with mineral fillers Contents: 310 ml Container: Cartridge Max. temperature resistance: 1000 C Density: 2.21 g/cm Colour: Cast grey Recoatable/Can be painted over: Yes Smell/fragrance: Neutral Viscosity/consistency: Pasty Long-term elasticity: Virtually no elasticity Shrinkage: Minimal Curing time: 2 d Full curing speed: 1 mm/d Water-soluble: Not readily soluble in water Min./max. temperature resistance: -5 to 1000 C Min./max. processing temperature: 5 to 30 C Resistance against: Fats, Household cleaning products, Oil, Flue gases and their condensates Shelf life from production/conditions: 12 Month / in sealed cartridge, max. 30C show more ... show less ...
Technical Specifications
No formation of sediment The individual constituents do NOT separate during storage Ready for use No prior stirring is necessary as with products in tubs, for example Easy to apply with a cartridge gun Frost-resistant Storage temperatures below 0 C (approx. -5 C) possible Silicone-free Notice When dry after curing, the putty is not elastic. The usage instructions are recommendations based on the tests we have conducted and our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.