We’ve upgraded Alisouq for a faster, smoother experience
Contact our support team anytime through the channels below.
Support Phone
+971 54 306 4845Support Email
customerservice@alisouq.com
ALI SOUQ PORTAL L.L.C is a UAE-based marketplace for construction materials, tools, hardware, industrial supplies, and home improvement products.
1–3 business days (Dubai) | 3–5 business days (Other Emirates)
14-day returns (conditions apply)
WEICON Primer Applicator
PROPERTIES: The applicator is suitable for the application of assembly agents and primers for the pre-treatment and priming of various surfaces and substrates.
APPLICATION: The Woolen Primer Wiper can be combined with WEICON Primer M 100, K 200, S 300, P 400, E 500 and Primer for Polyolefins. WEICON Primers are used for the pre-treatment and priming of various absorbent and non-absorbent surfaces such as metal, silicone, plastics, etc.
PROCESSING: Shake the activator well before use and apply thinly with a wool wiper. Observe flash-off times. Subsequent bonding should take place within the specified time. Do not allow to flash off for too short a time. In case of longer storage time or intermediate soiling, clean or prime the surfaces to be bonded again. For unknown materials, a suitability and compatibility test is essential.
SAFETY: When processing WEICON products, the physical, safety, toxicological & ecological data and regulations of the EC Safety Data Sheets (www.weicon.de) must be observed.
Portable
Cost effective
Iong lasting
WEICON Primer Applicator
PROPERTIES: The applicator is suitable for the application of assembly agents and primers for the pre-treatment and priming of various surfaces and substrates.
APPLICATION: The Woolen Primer Wiper can be combined with WEICON Primer M 100, K 200, S 300, P 400, E 500 and Primer for Polyolefins. WEICON Primers are used for the pre-treatment and priming of various absorbent and non-absorbent surfaces such as metal, silicone, plastics, etc.
PROCESSING: Shake the activator well before use and apply thinly with a wool wiper. Observe flash-off times. Subsequent bonding should take place within the specified time. Do not allow to flash off for too short a time. In case of longer storage time or intermediate soiling, clean or prime the surfaces to be bonded again. For unknown materials, a suitability and compatibility test is essential.
SAFETY: When processing WEICON products, the physical, safety, toxicological & ecological data and regulations of the EC Safety Data Sheets (www.weicon.de) must be observed.
