We’ve upgraded Alisouq for a faster, smoother experience
Top Categories
Top Sellers
Customer Service
loading...
Product Overview
High degree of joint noise insulation Proven joint acoustic insulation in accordance with DIN 52210 RST, W = 58 dB High volume weight Closed-cell, fine-pore polyethylene foam with good resilience Easy to use Simple, quick and clean to apply Compensates any uneven areas No cover film The roll does not fall apart, as it is glued in place Long service life Resistant to UV, ageing and weathering Resistant to moisture Building material class B1 in line with DIN 4102 Tested by the Leipzig Institute for Materials Research and Testing (MPFA), test certificate no. B III/B-01-001 The usage instructions are recommendations based on the tests we have conducted and our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Features
Partition wall tape B1 One-sided self-adhesive PE foam for preventing acoustic bridges when installing dividers. Proven joint acoustic insulation in accordance with DIN 52210 RST, W = 58 dB. Resistant to UV, ageing and weathering. Colour: Anthracite Acoustic insulation for joints: 58 dB Heat conductance ?: 0.034 W/(m*K) Heat conductance ? conditions: at 10C, in accordance with ISO 2581 Compression force deflection: 98 kPa Compression force deflection conditions: in accordance with ISO 844, 50% deformation Conditions for tensile strength: in accordance with ISO 1926 Min. tensile strength: 0.325 N/mm Min. transverse tensile strength: 0.220 N/mm Overall thickness: 3 mm Width: 30 mm Building material class: B1 - Of low flammability Building material class conditions: in accordance with DIN 4102 Resistance against: Aging, Weather, Humidity Moulded density: 29 kg/m Conditions for moulded density: in accordance with DIN EN ISO 845 (average) Compression set: 25 % Compression set conditions: after 22 hrs, at 23C, ISO 1853B Water absorption (%): 1 Vol-% Water absorption conditions: after seven days Water-vapour permeability: 0.72 g/m/d Conditions for water-vapour permeability: in accordance with ISO 1663, specimen thickness 5 mm Ultraviolet resistance: Yes Min. processing temperature: 5 C Max. processing temperature: 30 C Min. temperature resistance: -50 C Max. temperature resistance: 80 C Length of roll: 30 m Shelf life from production: 24 Month Conditions to maintain shelf life from production: at 20C and 50% relative humidity show more ... show less ...
Technical Specifications
High degree of joint noise insulation Proven joint acoustic insulation in accordance with DIN 52210 RST, W = 58 dB High volume weight Closed-cell, fine-pore polyethylene foam with good resilience Easy to use Simple, quick and clean to apply Compensates any uneven areas No cover film The roll does not fall apart, as it is glued in place Long service life Resistant to UV, ageing and weathering Resistant to moisture Building material class B1 in line with DIN 4102 Tested by the Leipzig Institute for Materials Research and Testing (MPFA), test certificate no. B III/B-01-001 The usage instructions are recommendations based on the tests we have conducted and our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.