We’ve upgraded Alisouq for a faster, smoother experience
Top Categories
Top Sellers
Customer Service
Brand: DECA
Alisouq ChoiceDECA PLASMA CUTTER D-PAC 120 119300 | for manual cutting on all ferrous and non-ferrous materials as long as electrically conductive | MADE IN ITALY
SKU: DECAPCD-P120
18112.5
(incl. VAT)
Colors:
loading...
Product Overview
BRAND : DECA
ITEM NO.: I-PAC 120
ORIGIN : ITALY
PROCESS : PAC
TECHNOLOGY : TRADITIONAL
MAINS VOLTAGE 50/60 HZ : 3 X 400V
ABSORBED POWER 60% MAX : 5,2 -17 kW
FUSE : 50A
CUTTING PERFORMANCE :
CURRENT RANGE : 45 120A
DUTY CYCLE MAX (40) : 115A @ 30%
DUTY CYCLE 60% (40) : 45A
Number of welding settings : 2
Cut / Severance (Fe) : 24 / 30 mm
Air pressure min/max : 5 6 bar
Air consumtion : 210 l/min
Threee-phase traditional plasma cutter for manual cutting on all ferrous and non-ferrous materials as long as electrically conductive: steel, copper, aluminum, stainless steel, etc. The D-PAC lines traditional generators are the ideal choice for sturdy and long-lasting systems. D-PAC 120 LAB plasma cutter is the ideal choice for workshop and carpentry work. D-PAC 120 LAB cuts up to 24 mm thickness with excellent quality in the surface. If there are no particular quality requests the machine cuts up to 30 mm thickness. Maximum cutting current 120A. The power supply voltage is three-phase 400 Volt.
The cutting arc ignition is done by high frequency. Cutting on perforated sheets and piercing are possible due to the advanced technology that makes the machine switch between cutting arc and pilot arc.
Technical Specifications
BRAND : DECA
ITEM NO.: I-PAC 120
ORIGIN : ITALY
PROCESS : PAC
TECHNOLOGY : TRADITIONAL
MAINS VOLTAGE 50/60 HZ : 3 X 400V
ABSORBED POWER 60% MAX : 5,2 -17 kW
FUSE : 50A
CUTTING PERFORMANCE :
CURRENT RANGE : 45 120A
DUTY CYCLE MAX (40) : 115A @ 30%
DUTY CYCLE 60% (40) : 45A
Number of welding settings : 2
Cut / Severance (Fe) : 24 / 30 mm
Air pressure min/max : 5 6 bar
Air consumtion : 210 l/min
Threee-phase traditional plasma cutter for manual cutting on all ferrous and non-ferrous materials as long as electrically conductive: steel, copper, aluminum, stainless steel, etc. The D-PAC lines traditional generators are the ideal choice for sturdy and long-lasting systems. D-PAC 120 LAB plasma cutter is the ideal choice for workshop and carpentry work. D-PAC 120 LAB cuts up to 24 mm thickness with excellent quality in the surface. If there are no particular quality requests the machine cuts up to 30 mm thickness. Maximum cutting current 120A. The power supply voltage is three-phase 400 Volt.
The cutting arc ignition is done by high frequency. Cutting on perforated sheets and piercing are possible due to the advanced technology that makes the machine switch between cutting arc and pilot arc.