We’ve upgraded Alisouq for a faster, smoother experience
Top Categories
Top Sellers
Customer Service
loading...
Product Overview
High creep capability and very good penetration, effectively protects even hard-to-reach rebates Water-displacing effect, penetrates and displaces moisture Free from aromatic compounds, suitable for commercially available paints and rubber and plastic components High resistance to heat and good flexibility at low temperatures Optimal corrosion protection from a layer thickness of just 50 VOC reduced Very high solids content Yield: Aerosol 180 g/m at 50 dry/liquid (1,000 ml container) 80 g/m at 50 dry Notice The material temperature should be +10C to +30C. After use, turn aerosol can upside down and spray until nozzle is empty. The usage instructions are recommendations based on the tests we have conducted and on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Features
Cavity wax PLUS For repairs and long-lasting preservation Chemical basis: Mineral oil, paraffin waxes and corrosion protection additives in dearomatized gasoline hydrocarbons Colour: Beige Conditions to maintain shelf life from production: at 10C to 30C
Technical Specifications
High creep capability and very good penetration, effectively protects even hard-to-reach rebates Water-displacing effect, penetrates and displaces moisture Free from aromatic compounds, suitable for commercially available paints and rubber and plastic components High resistance to heat and good flexibility at low temperatures Optimal corrosion protection from a layer thickness of just 50 VOC reduced Very high solids content Yield: Aerosol 180 g/m at 50 dry/liquid (1,000 ml container) 80 g/m at 50 dry Notice The material temperature should be +10C to +30C. After use, turn aerosol can upside down and spray until nozzle is empty. The usage instructions are recommendations based on the tests we have conducted and on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.