We’ve upgraded Alisouq for a faster, smoother experience
Top Categories
Top Sellers
Customer Service
loading...
Product Overview
Medium-strength bonding Can be removed using normal tools Can also be applied to stainless steel and passivated surfaces No "accelerator" or "activator" required Excellent media and thermal stability Universal products with a wide range of application Prevents detachment, e.g. through vibration and shock loads No unwanted locking problems such as with mechanical screw retainers, for example High resistance Resistant to a large number of bases, gases, solvents, oils and fuels (see resistance list) Silicone-free, solvent-free and oil-free DOS system: Practical one-handed operation thanks to the clever turn lock One hand always remains free. Continuously adjustable dispensing system Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum. No residue material in dispensing neck Costs optimised thanks to emptying with virtually no remaining product Notice The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre, and painted surfaces. Application area The usage instructions are recommendations based on the tests we have conducted and on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Features
Medium-strength screw retainer Removable screw retainer and sealing compound one-handed dispensing system Chemical basis: Dimethacrylic acid ester Colour: Blue fluorescent Density/conditions: 1.12 g/cm / in accordance with DIN EN ISO 2811-1 Min./max. viscosity 1 /conditions 1: 4000-9000 mPas / at 25C, Brookfield RVT, spindle 3/2.5 rpm Min./max. viscosity 2 /conditions 2: 1500-3000 mPas / at 25C, Brookfield RVT, spindle 3/20 rpm Suitable for max. thread: M36 Max. gap-filling ability: 0.25 mm Min./max. initial strength: 5-15 min Min./max. functional strength: 0.5-1 h Min./max. final strength: 1 h-3 h Min./max. compressive shearing strength /conditions: 10-20 N/mm / in accordance with ISO 10123 Min./max. breakaway torque: 15-25 Nm Breakaway torque conditions: DIN EN 15865 Min./max prevail torque: 3-8 Nm Conditions for prevail torque: DIN EN 15865 Min./max. processing temperature: 5 to 35 C Min./max. temperature resistance: -55 to 150 C Min. flashing point: 100 C Shelf life from production/conditions: 18 Month / at room temperature Weight of content: 25 g Silicone-free: Yes Solvent-free: Yes Fully hardening/curing conditions: Exclusion of oxygen and contact with metal (copper or iron ions) show more ... show less ...
Technical Specifications
Medium-strength bonding Can be removed using normal tools Can also be applied to stainless steel and passivated surfaces No "accelerator" or "activator" required Excellent media and thermal stability Universal products with a wide range of application Prevents detachment, e.g. through vibration and shock loads No unwanted locking problems such as with mechanical screw retainers, for example High resistance Resistant to a large number of bases, gases, solvents, oils and fuels (see resistance list) Silicone-free, solvent-free and oil-free DOS system: Practical one-handed operation thanks to the clever turn lock One hand always remains free. Continuously adjustable dispensing system Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum. No residue material in dispensing neck Costs optimised thanks to emptying with virtually no remaining product Notice The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre, and painted surfaces. Application area The usage instructions are recommendations based on the tests we have conducted and on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!