We’ve upgraded Alisouq for a faster, smoother experience
Top Categories
Top Sellers
Customer Service
loading...
Product Overview
Zinc flake coatings are chrome (VI)-free corrosion protection coatings for commercial vehicle construction, construction machines, agricultural vehicles and equipment, and all other fields that require vehicle construction standard corrosion protection requirements. The corrosion resistance of ZFHSL is as follows: Diameter ? M6 - 480h* Diameter ? M10 - 720h* * Guideline values: No base metal corrosion at points without thread in salt spray mist testing according to DIN EN ISO 9227 NSS. The designation ZFSHL refers to the following corrosion coating: Zinc flake coating, with top coat, silver colour, with lubrication that alters the friction coefficient. Adjusted friction coefficient range from 0.09? - 0.14? due to top coat with integrated lubricating particles Notice Hardness class 45H corresponds to a hardness of 450 HV The standard tip has an angle of 90, but very short lengths have an angle of 120. Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening. Tip: A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads. ISO 4027 replaces DIN 914 | There is some similarity | Nominal diameters for M1.4, M1.8, M14, M18, M22 are removed | Hardness classes for stainless steels introduced.
Features
Hexagon socket set screw with flattened tip ISO 4027, steel 45H, zinc flake, silver (ZFSHL) Thread type x nominal diameter: M10 Length: 12 mm Tip diameter: 2.5 mm Internal drive: HS5 Angle of the tip: 90 Degree Standards: ISO 4027 Material: Steel Hardness category: 45H Surface: Flake zinc silver Drive type: Hexagon socket Shape of tip: Tip RoHS-compliant: Yes show more ... show less ... See product details Show similar products
Technical Specifications
Zinc flake coatings are chrome (VI)-free corrosion protection coatings for commercial vehicle construction, construction machines, agricultural vehicles and equipment, and all other fields that require vehicle construction standard corrosion protection requirements. The corrosion resistance of ZFHSL is as follows: Diameter ? M6 - 480h* Diameter ? M10 - 720h* * Guideline values: No base metal corrosion at points without thread in salt spray mist testing according to DIN EN ISO 9227 NSS. The designation ZFSHL refers to the following corrosion coating: Zinc flake coating, with top coat, silver colour, with lubrication that alters the friction coefficient. Adjusted friction coefficient range from 0.09? - 0.14? due to top coat with integrated lubricating particles Notice Hardness class 45H corresponds to a hardness of 450 HV The standard tip has an angle of 90, but very short lengths have an angle of 120. Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening. Tip: A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads. ISO 4027 replaces DIN 914 | There is some similarity | Nominal diameters for M1.4, M1.8, M14, M18, M22 are removed | Hardness classes for stainless steels introduced.