We’ve upgraded Alisouq for a faster, smoother experience
Top Categories
Top Sellers
Customer Service
loading...
Product Overview
For challenging surfaces, particularly suitable for bonding plastics Good flexibility in the cold Wide range of adhesion options Raw materials used correspond to FDA directive 175.105 for the outer packaging of foodstuffs Notice Heat occurring during storage (e.g. due to solar radiation) must be avoided due to the changes to the outer shape of the hot melt adhesive this can cause. For production reasons, there are fluctuations in the rod length and/or thickness. For this reason, we only specify the content in grams. There may, for example, be 25 or 26 rods in a 500g sausage pack. The usage instructions are recommendations based on the tests we have conducted and on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Features
Hot melt adhesive 201 Ideal for difficult surfaces Weight of content: 500 g Chemical basis: Ethyl vinyl acetate Colour: White Length: 200 mm Diameter: 12 mm Viscosity: 5000 mPas Softening point: 90 C Viscosity conditions: at 180C Min./max. open time: 20-60 s Min./max. processing temperature: 180 to 200 C Shelf life from production: 36 Month Conditions to maintain shelf life from production: at room temperature, in the original container show more ... show less ...
Technical Specifications
For challenging surfaces, particularly suitable for bonding plastics Good flexibility in the cold Wide range of adhesion options Raw materials used correspond to FDA directive 175.105 for the outer packaging of foodstuffs Notice Heat occurring during storage (e.g. due to solar radiation) must be avoided due to the changes to the outer shape of the hot melt adhesive this can cause. For production reasons, there are fluctuations in the rod length and/or thickness. For this reason, we only specify the content in grams. There may, for example, be 25 or 26 rods in a 500g sausage pack. The usage instructions are recommendations based on the tests we have conducted and on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!