We’ve upgraded Alisouq for a faster, smoother experience
Top Categories
Top Sellers
Customer Service
loading...
Product Overview
Low-strength Easy to remove 100% seal Gaps are completely filled so that the resulting bonding provides protection against corrosion caused by friction and protection against rust. The accordion bottle makes it easy to empty residual product Resistant to a large number of bases, gases, solvents, oils and fuels Silicone-free, solvent-free and oil-free Notice The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre, and painted surfaces. NSF registered, Class S2, sealants - no direct contact with food NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water up to +82C The usage instructions are recommendations based on the tests we have conducted and on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no liability is assumed in relation to the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Features
Low-strength flange sealant For sealing flanges and surfaces with minimum joints up to max. 0.3 mm. Replacement for solid seals. Weight of content: 50 g Chemical basis: Dimethacrylic acid ester Fully hardening/curing conditions: Exclusion of oxygen and contact with metal (copper or iron ions) Colour: Green fluorescent Min./max. viscosity 1 /conditions 1: 55000-80000 mPas / at 25C, Brookfield RVT, spindle 6/2.5 rpm Min./max. viscosity 2 /conditions 2: 15000-25000 mPas / at 25C, Brookfield RVT, spindle 6/20 rpm Density/conditions: 1.05 g/cm / in accordance with DIN EN ISO 2811-1 Min./max. initial strength: 15-30 min Min./max. functional strength: 3-6 h Min./max. final strength: 6 h-24 h Min./max. processing temperature: 5 to 35 C Min./max. temperature conditions: -55 to 150 C Min. flashing point: 100 C Min. prevail torque: 3 Nm Conditions for prevail torque: DIN EN 15865 Min./max. compressive shearing strength /conditions: 4-11 N/mm / in accordance with ISO 10123 Min./max. tensile strength /conditions: 2-8 N/mm / in accordance with ASTM D-2095 Min./max. shear strength: 2-4 N/mm Conditions for tensile shear strength: in accordance with ASTM D-950 Min. breakaway torque: 8 Nm Breakaway torque conditions: DIN EN 15865 Shelf life from production/conditions: 18 Month / at room temperature Silicone-free: Yes Solvent-free: Yes show more ... show less ...
Technical Specifications
Low-strength Easy to remove 100% seal Gaps are completely filled so that the resulting bonding provides protection against corrosion caused by friction and protection against rust. The accordion bottle makes it easy to empty residual product Resistant to a large number of bases, gases, solvents, oils and fuels Silicone-free, solvent-free and oil-free Notice The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre, and painted surfaces. NSF registered, Class S2, sealants - no direct contact with food NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water up to +82C The usage instructions are recommendations based on the tests we have conducted and on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no liability is assumed in relation to the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!