We’ve upgraded Alisouq for a faster, smoother experience
Top Categories
Top Sellers
Customer Service
loading...
Product Overview
High-strength epoxy resin adhesive The repair restores the original strength and stiffness Fewer spot welds Meets the requirements of automotive manufacturers Glass particle technology Even if too much pressure is exerted, an adhesive layer thickness of 0.25 mm is guaranteed Excellent stability The adhesive will not run on vertical surfaces (thixotropic) Excellent corrosion protection The original degree of rust resistance is maintained Corrosion is prevented from occurring at spot welds Weldable Can be sanded and painted over Silicone- and VOC-free Notice Not suitable for load-bearing bodywork parts (e.g. A-pillars, longitudinal chassis beams etc.). When replacing parts, do not glue on visible surfaces, as "shadow lines" may appear. The product must be stored in a frost-free location. For cordless or pneumatic guns, the lowest setting/feed should be used to prevent the cartridge from deforming. The usage instructions are recommendations based on the tests we have conducted and on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Features
Powerbond bodywork adhesive High-strength 2-component epoxy resin system for bodywork repairs Container: Double cartridge Chemical basis: Epoxy resin Colour: Black Density: 1.1 g/cm Smell/fragrance: Characteristic Min. tensile strength: 30 N/mm Min. combined tension and shear resistance: 28 N/mm Conditions for combined tension and shear resistance: after four hours, 23C, EN 1465 Conditions for tensile strength: at 23C, in accordance with ASTM D-638 Shore D hardness: 80 Conditions for Shore hardness: in accordance with DIN 53505 Working life: 60 min Conditions for working life: at 23C Curing time: 4 h Min./max. temperature resistance: -30 to +120 C Min./max. processing temperature: 15 to 25 C Max. short-term temperature resistance: 190 C Max. final strength: 24 h Conditions for final strength: at 23C Resistance against: Petrol, Diesel, Cooling liquid, Engine and gear oils VOC-free: Yes Silicone-free: Yes Shelf life from production: 24 Month Additional articles: Acetone cleaner, art. 0893460, Quattro rust stop, art. 08932141, pneumatic axial grinder, art. 07032310, Flexi-Disc, art. 0578705 , nylon fleece disc, art. 067322 50/75, mini fleece disc, art. 0673205.../207..., locking pliers, art. 071409... Contents: 225 ml show more ... show less ...
Technical Specifications
High-strength epoxy resin adhesive The repair restores the original strength and stiffness Fewer spot welds Meets the requirements of automotive manufacturers Glass particle technology Even if too much pressure is exerted, an adhesive layer thickness of 0.25 mm is guaranteed Excellent stability The adhesive will not run on vertical surfaces (thixotropic) Excellent corrosion protection The original degree of rust resistance is maintained Corrosion is prevented from occurring at spot welds Weldable Can be sanded and painted over Silicone- and VOC-free Notice Not suitable for load-bearing bodywork parts (e.g. A-pillars, longitudinal chassis beams etc.). When replacing parts, do not glue on visible surfaces, as "shadow lines" may appear. The product must be stored in a frost-free location. For cordless or pneumatic guns, the lowest setting/feed should be used to prevent the cartridge from deforming. The usage instructions are recommendations based on the tests we have conducted and on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.